[. . . ] 1
1 2 3 4
Power on
For setup, plug the RP-AC66 into a power outlet within 6 feet of your router/AP. [. . . ] Your network info should be: RP-AC66 Wi-Fi network name
Existing router network name_RPT
RP-AC66 Quick Start Guide
Login information
WPS
5 6
RP-AC66 Wi-Fi password
Best performance
WPS
Router/AP
Existing router network password
7
Position within 6 feet. 1 2 3 4
Wi-Fi performance LEDs
Performance Excellent
Power LED 5GHz LED 2. 4GHz LED Gigabit RJ-45 port
5 6 7
WPS button Reset button Power On/Off switch
Signal strength between the router/AP and RP-AC66 2. 4 GHz / 5 GHz Color Green Orange Red none
Poor performance
LED
The LEDs should start blinking once the RP-AC66 is plugged in. The Wi-Fi LED indicates signal strength to/from the router/AP for both 2. Quickly go to the RP-AC66 and press and hold the WPS button for at least 3 seconds. [. . . ] If the LED indicates poor signal, move the RP-AC66 closer to the router/AP. [. . . ]